D12D-DualDome Camera Series

The MOBOTIX D12D-DualDome network camera series with its elegant design is well suited for use in interiors and on building facades that have high design requirements.

The new optional wall mount (see below) provides a concealed cable guide and seals standard-RJ-45 flush-mounted power connectors. And it turns any D12D camera - which is already weatherproof (-30°C to +60°C i.e. -22 to +140°F) - into an IP65-certified camera.

The camera models in the D12D-DualDome series are equipped with two flexible, independently adjustable camera modules, which can be individually positioned in any direction. The individual models are available with different lenses. If a Super wide-angle lens is used in both camera modules, the cameras are able to reach a viewing angle of 180°.

With megapixel resolution (1280x960 pixels), integrated microphone and speaker, ISDN connection, motion detection, alarm management with pre- and post-alarms, alarm alert via telephone call, digital zoom, event-controlled recording, switching functions (1x In, 1x Out) and an RS232 interface, the D12D-DualDome cameras also include all the trusted MOBOTIX functions for convenient, professional camera use.

 
Camera Models
 
D12Di-Sec
M22M

FixDome camera with two individually adjustable lenses and megapixel resolution. The elegant design is perfect for the discrete surveillance of buildings and facades. Standardly equipped with different lens combinations. Integrates all MOBOTIX functions. On the different models described below, please refer to lens options.

Article numbers:
D12Di-Sec-D22D22 (Super wide-angle, Day)
D12Di-Sec-D43D43 (Wide-angle, Day)
D12Di-Sec-DNight-D22N22 (Super wide-angle, Day/Night)
D12Di-Sec-DNight-D43N43 (Wide-angle, Day/Night)

 

 
D12Di-IT
M22M

FixDome camera with two individually adjustable lenses and VGA resolution. The elegant design is perfect for the discrete surveillance of buildings and facades. Integrates all MOBOTIX functions. On the different models described below, please refer to lens options.

Article numbers:
D12Di-IT-D22D22 (Super wide-angle, Day)
D12Di-IT-D43D43 (Wide-angle, Day)
D12Di-IT-DNight-D22N22 (Super wide-angle, Day/Night)
D12Di-IT-DNight-D43N43 (Wide-angle, Day/Night)

 

 
Outdoor Wall Mount (Included)
 
The wall mount for the D12D camera models turns any D12D camera – which is already weatherproof (-30°C to +60°C i.e. -22 to +140°F) – into an IP65-certified camera.
 
 
Lenses
 

The lenses in the D12D camera models that are fixed with a retaining ring can be exchanged on location.

The lenses in the standard models are adjusted in the factory and tested for quality so that there is generally no need to adjust the focus on location.

In addition to the standard models, all the other MOBOTIX lenses can also be installed in the D12D camera models .

Note: In the color sensors, the infrared CUT filter is NOT in the lens, but rather already installed in the lens casing in the camera..

 
Most important functions in the D12D camera series
 
  • Universal dual camera with two individually adjustable camera modules (color or black-and-white lenses)
  • Exposure time for poor lighting conditions or infrared exposure: 0.2 lux at 1/60 second, 0.005 lux at 1 second
  • Lenses from Super wide-angle (90°) to telephoto lens (15°)
  • 180° angle possible with Super wide-angle lenses
  • PIR sensor for motion detection in dark environments
  • Microphone and speaker with all audio functionalities (Voice over IP and SIP telephony with simultaneous video)
  • Direct switching functions (1x In, 1x Out) und RS232 interface
  • Wall mount with concealed cable guide via RJ-45 flush-mounted power connector and installation room for WLAN or I/O module
  • Optional: Corner and mast mount